Peste 40 000 de produse IT și electronice de consum de la producători de top

MEMORY DIMM 4GB PC21300 DDR4/KVR26N19S6/4 KINGSTON

Cod ELKO
1263826
Kingston Technology ValueRAM . Component for: PC/Server, Internal memory: 4 GB, Memory layout (modules x size): 1 x 4 GB, Internal memory type: DDR4, Memory form factor: 288-pin DIMM, CAS latency: 19, Product colour: Berry, Green
PRODUS ÎN ECOM Vreau sa devin partener
SPECIFICAȚII
Features
Internal memory type
DDR4
Internal memory
4 GB
Buffered memory type
Unregistered (unbuffered)
CAS latency
19
Memory voltage
1.2 V
Memory form factor
288-pin DIMM
Memory data transfer rate
2666 MT/s
Component for
PC/Server
Memory layout (modules x size)
1 x 4 GB
ECC
No
Memory channels
Single-channel
Memory ranking
1
Module configuration
512M x 64
Row cycle time
45.75 ns
Refresh row cycle time
350 ns
Row active time
32 ns
Programming power voltage (VPP)
1.2 V
Country of origin
Taiwan
Product colour
Berry/Green
Cooling type
Heatsink
Backlight
No
Lead plating
Gold
Windows operating systems supported
Yes
Mac operating systems supported
Yes
Linux operating systems supported
Yes
JEDEC standard
Yes
Compatible products
370 ROG STRIX H370-F GAMING D840MA Desktop Series D840MB Desktop Series D840SA Desktop Series PRIME B350 - PLUS PRIME B350-PLUS PRIME B350M - A PRIME B350M-A PRIME B350M-A/CSM PRIME B360-PLUS/CSM PRIME B360M-A PRIME B360M-C/CSM PRIME B360M-K PRIME B450
Operational conditions
Operating temperature (T-T)
0 - 85 °C
Storage temperature (T-T)
-55 - 100 °C
Compliance certificates
RoHS
Doesn't contain
Halogen
Weight & dimensions
Width
133.35 mm
Height
31.25 mm
Harmonized System (HS) code
84733020

ValueRAM's KVR26N19S6/4 is a 512M x 64-bit (4GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 512M x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers.

  • Power Supply: VDD = 1.2V Typical
  • VDDQ = 1.2V Typical
  • VPP = 2.5V Typical
  • VDDSPD = 2.2V to 3.6V
  • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
  • Low-power auto self refresh (LPASR)
  • Data bus inversion (DBI) for data bus
  • On-die VREFDQ generation and calibration
  • Single-rank
  • On-board I2 serial presence-detect (SPD) EEPROM
  • 8 internal banks; 2 groups of 4 banks each
  • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
  • Selectable BC4 or BL8 on-the-fly (OTF)
  • Fly-by topology
  • Terminated control command and address bus
  • PCB: Height 1.23” (31.25mm)
  • RoHS Compliant and Halogen-Free

Link către pagina producătorului
Specificațiile, imaginile și echipamentele pot fi modificate de către producător fără notificare prealabilă.