D3 S4520. SSD capacity: 240 GB, SSD form factor: 2.5", Data transfer rate: 6 Gbit/s, Component for: Server/workstation
SPECIFICAȚII
Component for
Server/workstation
Data transfer rate
6 Gbit/s
Random read (4KB)
44000 IOPS
Random write (4KB)
15500 IOPS
Random read (100% span)
44000 IOPS
Random write (100% span)
15500 IOPS
Random latency - read (up to)
102 µs
Random latency - write (up to)
61 µs
Sequential latency - read (up to)
36 µs
Sequential latency - write (up to)
37 µs
End-to-End Data Protection
Yes
Enhanced Power Loss Data Protection technology
Yes
SSD temperature monitoring
Yes
Security algorithms
256-bit AES
Mean time between failures (MTBF)
2000000 h
Use conditions
Server/Enterprise
Power consumption (idle)
1 W
Operating temperature (T-T)
0 - 70 °C
Maximum operating temperature
70 °C
Minimum operating temperature
0 °C
Operating vibration
2.17 G
Non-operating vibration
3.13 G
Internal memory type
SATA 3.0 6Gb/S
Power consumption (active)
2.3 W
Processor family
Intel SSD D3
Sequential reading
470 MB/s
Sequential writing speed
233 MB/s
SSD endurance rating
1.0 PBW
Commodity Classification Automated Tracking System (CCATS)
G162706
Export Control Classification Number (ECCN)
5A992C
Harmonized System (HS) code
84717070
Enhanced Power Loss Data Protection
Enhanced Power Loss Data Protection prepares the SSD for unexpected system power loss by minimizing data in transition in temporary buffers, and uses on-board power-loss protection capacitance to provide enough energy for the SSD firmware to move data from the transfer buffer and other temporary buffers to the NAND, thus protecting system and user data.
Hardware Encryption
Hardware encryption is data encryption done at the drive level. This is used to ensure that the data stored on the drive is secured from unwanted intrusion.
End-to-End Data Protection
End-to-End Data Protection ensures integrity of stored data from the computer to the SSD and back.
Temperature Monitoring and Logging
Temperature Monitoring and Logging uses an internal temperature sensor to monitor and log airflow and device internal temperature. The logged results can be accessed using the SMART command.
Specificațiile, imaginile și echipamentele pot fi modificate de către producător fără notificare prealabilă.
