Peste 40 000 de produse IT și electronice de consum de la producători de top

NET MEDIA CONVERTER 100M/FT-806A20 PLANET

Cod ELKO
1455706
PLANET FT-806A20. Maximum data transfer rate: 100 Mbit/s, Converter input interface: 100Base-TX, Converter output interface: 100Base-FX. Maximum transfer distance: 20000 m, Wavelength: 1310 nm, Fiber mode structure: Single-mode. Product colour: Black, Housing material: Metal. Fiber optic connector: SC, Connectivity technology: Wired. Input voltage: 100 - 240 V, AC input frequency: 50 - 60 Hz, Output voltage: 5 V
PRODUS ÎN ECOM Vreau sa devin partener
SPECIFICAȚII
Network
Maximum data transfer rate
100 Mbit/s
Converter input interface
100Base-TX
Converter output interface
100Base-FX
Ethernet interface type
Fast Ethernet
Ethernet LAN data rates
10/100 Mbit/s
Copper ethernet cabling technology
100BASE-TX/10BASE-T
Flow control support
Yes
Auto MDI/MDI-X
Yes
Auto-negotiation
Yes
Duplex system
Full
Performance
Maximum transfer distance
20000 m
Wavelength
1310 nm
Fiber mode structure
Single-mode
Tx power (min)
-14 dBmW
Tx power (max)
-8 dBmW
Sensitivity
-31 dBmW
Features
Internal
No
Housing material
Metal
LED indicators
Yes
Product colour
Black
Ports & interfaces
Connectivity technology
Wired
Fiber optic connector
SC
Power
Input voltage
100 - 240 V
AC input frequency
50 - 60 Hz
Output voltage
5 V
Output current
2 A
External power adapter
Yes
Weight & dimensions
Width
97 mm
Depth
70 mm
Height
26 mm
Weight
200 g
Operational conditions
Operating temperature (T-T)
0 - 50 °C
Storage temperature (T-T)
-40 - 70 °C
Operating relative humidity (H-H)
5 - 90 %
Storage relative humidity (H-H)
5 - 90 %
Certification
FCC Class A, CE Class A
Harmonized System (HS) code
85176990

PLANET FT-80x is a Fast Ethernet Bridge 100BASE-FX fiber to 10/100BASE-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation in fiber-optic interface. The fiber port of the converter operates at 1310 nm and uses ST, SC, MTRJ, VF45 or WDM connectors. Multi-mode models that support distances up to 2km and single-mode models that support distances up to 15/20/35/50/60km are available.media and provide efficient solution to monitoring the net.

The FT-80x series is with LFP (Link Fault Pass-through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch provides the disabling or enabling of the LFP function

LLCF (Link Loss Carry Forward) means when a device is connected to the converter and the TP line loses the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device is connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the transmit link. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.

  • Complies with IEEE 802.3, IEEE 802.3u 10/100BASE-TX, 100BASE-FX standard
  • Connectors: One RJ45 (auto-MDI/MDI-X) twisted pair, EIA568
  • One fiber-optic, 1310nm wavelength, connector type and distance vary with model
  • FT-806A20 / FT-806A60: Tx-1310nm, Rx-1550nm
  • FT-806B20 / FT-806B60: Tx-1550nm, Rx-1310nm
  • Data Transfer Rate:
  • TP: 10/100Mbps
  • FX: 100Mbps
  • Duplex mode support:
  • Full or half-duplex mode by auto-negotiation (TP)
  • Full or half-duplex mode by DIP switch (FX)
  • LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL
  • DIP switch: 2 DIP switches
  • Rear DIP switch: FX duplex mode selection
  • Side DIP switch: LFP (Link Fault Pass-through) mode selection
  • IEEE 802.3x Full-Duplex Flow-Control and Back-Pressure in Half-Duplex eliminate the loss of packets

Link către pagina producătorului
Specificațiile, imaginile și echipamentele pot fi modificate de către producător fără notificare prealabilă.