Peste 40 000 de produse IT și electronice de consum de la producători de top

NET MEDIA CONVERTER 100M/FST-802S15 PLANET

Cod ELKO
1455759
PLANET FST-802S15. Maximum data transfer rate: 100 Mbit/s, Converter input interface: 10Base-T, 100Base-TX, Converter output interface: 100Base-FX. Maximum transfer distance: 15000 m, Wavelength: 1310 nm, Fiber mode structure: Single-mode. Product colour: Black. Fiber optic connector: SC, Connectivity technology: Wired. Input voltage: 5 V, Input current: 2 A
PRODUS ÎN ECOM Vreau sa devin partener
SPECIFICAȚII
Network
Maximum data transfer rate
100 Mbit/s
Converter input interface
100Base-TX/10Base-T
Converter output interface
100Base-FX
Networking standards
IEEE 802.3/IEEE 802.3u
Ethernet interface type
Fast Ethernet
Ethernet LAN data rates
10/100 Mbit/s
Auto MDI/MDI-X
Yes
Duplex system
Full/Half
Performance
Maximum transfer distance
15000 m
Wavelength
1310 nm
Fiber mode structure
Single-mode
Tx power (min)
-20 dBmW
Tx power (max)
0 dBmW
Sensitivity
-32 dBmW
Features
Internal
No
LED indicators
Yes
Product colour
Black
Ports & interfaces
Connectivity technology
Wired
Ethernet LAN (RJ-45) ports
1
Fiber ports quantity
1
Fiber optic connector
SC
DC-in jack
Yes
Power
Input voltage
5 V
Input current
2 A
Weight & dimensions
Width
94 mm
Depth
81 mm
Height
26 mm
Weight
220 g
Operational conditions
Operating temperature (T-T)
0 - 50 °C
Storage temperature (T-T)
-10 - 70 °C
Operating relative humidity (H-H)
5 - 90 %
Storage relative humidity (H-H)
5 - 90 %
Harmonized System (HS) code
85176990

Distance Extended with Fiber Optic Cable

PLANET FST-80x Smart Media Converter series provides media conversion between 10/100BASE-TX and 100BASE-FX interfaces, such as multi-mode ST/SC connectors (2km), single-mode SC connector (15/35/50km) and single fiber connector using the wavelength-division multiplexing (WDM) technology (20/60km) to enable to extend links over long distances using fiber optic cable.


Enhanced Smart Management Features

The FST-80x series provides auto MDI/MDI-X on their TP port and store-and-forward mechanism to eliminate faulty packets. Use the DIP switch from the FST-80x to configure the available smart functions, such as the half/full duplex, auto-negotiation / force and 10/100Mbps options for TP and fiber interfaces. Besides, the Link Loss Return (LLR) and Link Loss Carry Forward (LLCF) functions can immediately alarm network administrator once there is a media link issue, thus helping to monitor the status of the entire network.


Easy Installation

The FST-80x series can be connected easily and cost-effectively as these smart media converters can be used as a standalone unit when powered on by its DC adapter, or used as a slide-in module connected to PLANET 19-inch, 16-slot web smart/managed media converter chassis (MC-1600MR/MC-1600MR48 and MC-1610MR/MC-1610MR48). When working with the web smart/managed media converter chassis, the status of the FST-80x can be monitored via the local RS-232 console and remote web interface.

  • Standards
  • Complies with IEEE 802.3, 10BASE-T, IEEE 802.3u, 100BASE-TX and 100BASE-FX Ethernet standards
  • Interface
  • One 10/100BASE-TX port with RJ45 connector
  • One 100BASE-FX port with ST/SC/WDM connector supporting multi-mode or single-mode fiber optic cable
  • Auto-negotiation and auto-MDI / MDI-X for 10/100BASE-TX port
  • Layer 2 Features
  • Back-pressure and IEEE 802.3x compliant flow control and full wire-speed forwarding rate
  • Link Loss Return (LLR) switch on each fiber optic is to aid in troubleshooting remote network connections
  • Link Loss Carry Forward (LLCF) works with LLR in diagnosing network connections
  • Smart Management
  • Provides DIP switch for setting fiber ( HDX/FDX), UTP ( auto-negotiation / manual), speed (10/100Mbps), duplex mode (half/full), LLR ( disable/enable), LLCF ( disable/enable)
  • Manageable through web smart/managed media converter chassis system (MC-1600MR/MC-1610MR series)
  • Hardware
  • Used as a stand-alone device or works with web smart/managed media converter chassis for up to 16 converters with redundant power supply for optional expanding use
  • LED indicators for converter status
  • Choice of fiber-connector from ST/SC/WDM, multi-mode/single-mode fiber
  • EMI standards complies with FCC, CE class B

Link către pagina producătorului
Specificațiile, imaginile și echipamentele pot fi modificate de către producător fără notificare prealabilă.